Brief Introduction：A feeder for a periodic reciprocating movement, used for continuous feeding of large pieces of material.
Application : The mine machine is suitable for the bulk material with short distance of feed grain size less than 400mm, and is widely used in mines, construction, chemical industry, cement and building materials.
Product Improvement：According to the requirements of the user, the motor can be changed to speed motor so as to adjust the amount of mine.
更新： 2018-01-10 09:01:41
1. It can be put on the ground and can be hoisted on the unloading port of the mine.
2. It is convenient to change and control the flow at any time.
3. The trough floor is reciprocated, and the stroke can be adjusted properly by the eccentric wheel of the driving device.
4. The slot width of the slot feeder is about 3 times the maximum granularity of the feed.
Usually installed under the ore bin, ores go into the bottom of the groove on the bottom of the bushing, bushing is arranged in the roller, and the eccentric mechanism makes the bushing and double shaft of the speed reducer connected, and then with the motor coupling. When the utility model is used, the motor drives the speed reducer through the coupling, and the device is driven by the eccentric disk to reciprocate linearly with the leaking disk between the bottom of the groove frame and the roller.
Max feeding size mm